WiFi network name, or SSID (Service Set Identifier) ​​- we all come across this concept when setting up a wireless signal on a router. If , then the SSID is displayed when we select it to connect. In this post, I will show you how to determine the network name. And also how to change the SSID name on TP-Link, Asus, Zyxel Keenetic, D-Link, Apple and Mercusys.

Word SSID in the original it sounds like "Service Set Identifier". As the name already suggests, this is the service identifier of the network.

What is the wifi network SSID?

So wifi SSID is the name wireless network, Its name.

By default, when you plug the router into a power outlet, it automatically starts to distribute a wireless signal and it already has some kind of WiFi network name. However, when you turn on the wireless module on your laptop or phone and try to connect, there may be several with the same name among the many available SSIDs. For example, "TP-LINK_1234", or "TP-LINK_1234_5G" if it operates at a frequency of 5 GHz. These are just your neighbors who did not change the SSID on their Wi-Fi routers. You can recognize our network among them from the sticker, which is located on the router case. The wifi name and password for authorization are indicated there if the network is initially protected.

For security reasons, the network name must be renamed immediately when you first configure the router.

How to find out the SSID of your wifi and change its name?

Beginners often ask where to get this very SSID - how to find it and where to find it? To see the name of your WiFi networks, you first need to go to the admin panel of the router and find the wireless signal settings there. AT different models menu sections where these configurations are hidden may differ. The key here is to understand the principle. In settings wifi connections the router has the ability to find out the SSID.

In the same section, we can change the name of the WiFi network. And assign for her your individual, unlike any other SSID.

Change network SSID in D-Link router

To change the network name on the D-Link router, you need to go to the "Wi-Fi - Basic Settings" section. Here you will see the column "SSID" - we enter the name we need in it.

How to find out and change the SSID on a TP-Link router

Change the SSID of the WiFi network in old version software on the router TP Link you can by going to the "Wireless Mode - Settings" section. Here we are interested in the value of the "Wireless Network Name" field. By default, it will be called something like "TP-LINK_137B00" by the name and serial number of the router - just erase the text and write your name. Then we save the settings.

To change the WiFi network name in new version admin panel, you need to open the tab " Basic setup”, item “Wireless Mode” and find the same text input field called “Wireless Network Name”.

Where to look and how to change the SSID name of the WiFi network to Asus

On routers Asus with a modern admin panel in black and blue (Black Diaomond) just enter the "Wireless network" menu and change the value of the "SSID" item

We look and change the wifi SSID on the Zyxel Keentic router

At Zyxel Keentic SSID change occurs in the "Wi-Fi Network" section, "Access Point" tab

We come up with our own name, without changing anything else in the configuration. Save the settings and reboot the router. After changing the network name, you will need to reconnect all your devices that accessed the Internet via a wireless signal to it.

To change the SSID on updated Keenetic routers, you need to open the "Home network" menu. And change the value in the column "Network name (SSID)"

The new name is also activated after restarting the device.

Zyxel support has also written their own guide for you to change your network name and password. You can enrich your baggage of knowledge with its help.

How to change WiFi network SSID name on Mercusys

To change the wifi name in the router Mercusys you need to go to the advanced section in the settings and open the "Wireless mode" menu.

And here we change the value in the field "Wireless network name (SSID)"

How to change WiFi SSID name on Apple Airport router?

router Apple Airport assigns the network name itself by default in the form "Apple Express Network 123456". To change the name of the Apple Airport Wi-Fi network, which operates at a frequency of 2.4 GHz, run the Airport Utility program and go to "Manual Setup".

Here we will need the “Wireless” tab, where we look for the “Wireless Network Name” item - this is the network name displayed on laptops and smartphones. We erase and enter our own. Then save with the "Update" button.

If you need to change the name of the network at a frequency of 5GHz, then additionally go to the "Wireless Network Options" section

and replace the value of the line "5G Network Name"

How to change SSID and password from iPhone?

Those who have already read articles about Apple Airport on this blog know that there is also a special mobile app for iPhone to control the router without a computer. So, you can change the name of WiFi through this program. To do this, you need to run it

and click on the picture with the router

And click on the "Edit" button

and change the value of the item - what would you think? That's right, "Network" again, well, passwords for the heap.

Then save the changes with the "Finish" button.

In order to change the network name to a 5 GHz network, you will have to dig deeper again, as it was in the computer version of the application. Namely, we go back to start page change settings and go not to "Network", but to "Advanced"

Here you can already change the configuration of the 5GHz network. But attention - the password remains the same as on the main network at 2.4 GHz - this is such a feature.

Apparently, the Apple developers put such a small bolt on our connection security.

Video instruction for changing the wifi name

If, literally, the meaning of this abbreviation is translated, then it means - Service Set Identifier. That is identifier online service. With it, the user can find out the name of this or that service, its location and other necessary data. For example, such a function would be useful when connecting to an unknown wireless access point on which a password is set or missing. When the adapter is turned on, the system recognizes them and displays all the necessary information.

If the ssid is hidden from foreign devices, then the system will not detect. In simpler terms, software will not be able to find the network and it will be impossible to connect to it.

If the user creates a similar point, then it will be necessary know in advance Service Set Identifier of the router through which the wireless connection will be distributed.

So, the SSID of the network for Wi-Fi in Android is needed in order to connect to the access point. Users can set absolutely any name for their network. This is done in router settings, In chapter " Setting wireless communication ". With this action, any problems should not arise, since everything is very simple and clear. But how to get the Service Set Identifier of the connection? This will be discussed below.

What is multi ssid mode

Some routers capable of distributing wireless data in multi ssid mode. That is, the router can broadcast up to four wi-fi channels to which various gadgets with the appropriate module can connect. main feature of such a regime is the ability to assign own identifier vlan to a specific wifi network. Thus, the connection source can function in different access points with different types of access and functionality.

In order to activate this mode necessary:

How to find and connect to a hidden Wi-Fi network

In order to increase the security of a outbred connection (for example, so that Wi-Fi is not hacked), you can hide your point access and will not be detected by devices with a built-in module. But, it should be remembered that such protection can make life difficult for you, since each time the connection will not be made automatically, but manually, by entering all the required data.

So, quite often, users hide their wireless networks, and in order to find them, you need to use this instruction:

In order for the connection to be configured, you must correctly enter all the data that you can see on the underside of the router (service sticker). If an error is made, then the connection will not be established accordingly.

If you are asking the question “What is a network SSID?”, then you will find all the answers here. Of course, on the Internet you can find a simple definition that this is the name of the network. But in fact, everything is much more complicated and far from being for everyone, this definition allows us to clarify the situation.

Many authors prefer to sketch out a lot of obscure terms from the field computer networks but do not explain all concepts. We will go the other way and try to explain in detail what an SSID is and what manipulations can be carried out with this parameter.

Learn more about determining the SSID

So, SSID is really an identifier, that is, the name of the network to which you can connect. This abbreviation stands for "Service Set Identifier". Literally, it translates as "Service Set Identifier". Indeed, in the process of network operation, a large number of services. This is a connection protection service, and information transfer services, and much more. All of them, for the convenience and ease of perception of the user, are presented in the form single network WiFi.

It is this identifier that we see when we look at available Wi-Fi networks, as shown in Figure 1.

Rice. 1. View available Wi-Fi networks

Moreover, we will see exactly the same identifiers if we connect using an Android smartphone or any other device that can work with Wi-Fi.

Each router initially has its own, unique SSID. It is written on the back along with serial number, model and data to enter the device settings. An example can be seen in Figure 2.

Rice. 2. Router network ID on the back of the device

From all this, there are a few main points that you need to know about SSID:

1. SSID is a unique network identifier.
2. SSID is only for Wi-Fi networks. For local and global networks that use a cable connection, such an identifier does not make any sense.
3. You can find the SSID by opening all available connections on your computer, smartphone or tablet. In this case, the network name will be the same for all devices - each network has its own name.

All clear?

If not, ask your questions in the comments to this article. We will definitely answer them and help you clarify all the incomprehensible details of this puzzle. Although it is a fairly simple concept. Its setup looks just as simple.

A few words about changing the SSID

In addition to the above two methods, you can find out the SSID in the router settings. But, if you can go into these very settings, you will probably be able to see the standard identifier. The fact is that all the information for entering those is also on the back of the router. Consider the process of changing the identifier in stages:

1. Connect to the selected Wi-Fi network.

2. First, look at the router for the address to enter the settings, username and password. In Figure 2, this information is circled in green.

Note: The data for entering the router settings can be specified on English language("Login", "Password"). And also, usually, instead of a link, an IP address is indicated. But even if you cannot find it on the router, do not be sad, because there are only two options - 192.168.0.1 or 192.168.1.1.

Rice. 3. Entering the router settings

Note: Most often, the words “admin” and “admin” are used as standard login and password. But, in any case, you need to look at the router.

4. And then it all depends on the model of the router. In some cases, the network name is on the main settings page, while in others it takes a long time to find this parameter. For example, TP-Link routers have a “Wireless” section, in which there is a “Wireless Settings” subsection. And there you can already find the “Wireless Network Name” parameter, that is, “Wireless Network Name”.

Rice. 4. The "Wireless Network Name" parameter in the settings of the TP-Link router

Actually, all you need to do to change the name is to enter a new name and click the "Save" button at the bottom of the open window.

Of course, depending on the model, the settings interface will differ, but there will always be some parameter associated with the network name. This will be its identifier, that is, the SSID.

Tip: To change the router settings, it is recommended to use Google browser Chrome. Otherwise, there may be problems with the correct saving of the changes made. But in all browsers that work on the Chromium engine, this happens quite rarely.

If you can't find this setting, contact your router manufacturer's support team. You can also call your ISP. Usually operators should help to resolve such issues. In addition, you can write your router model in the comments, and we will help you find the SSID in its settings.

As you can see, everything is quite simple!

But knowing how to change the Wi-Fi ID is not enough to complete this task. You also need to know how to choose the right name.

Network name rules

There are a few rules to help you make up the "correct" network name. By the “correct” name, we mean one that cannot be simply hacked and connected without authorization. These are the following rules:

• the name must contain letters and numbers;
• you should not use any “bright” words in the name that can only attract unnecessary attention of intruders (which in this case may be your neighbors);
• you cannot use the date of birth, phone number or any other personal information in the SSID;
• do not use Cyrillic to compose the network name, the name can only be set in Latin letters;
• use underscores, hyphens, and other punctuation marks whenever possible.

And also experts advise changing the SSID from time to time so that other users cannot connect to your network so easily. Although the main thing, of course, is to create a strong password and, again, change it sometimes. But paying attention to the name of the Wi-Fi network is also important.

And now let's reveal a few secrets regarding SSID, in particular, those related to MultiSSID.

MultiSSID - several names of the same network

It should be said right away that this function is also not available in all routers, but it is quite useful. It is very easy to check this - if the word “MultiSSID” is somewhere in the settings, then the function is present and vice versa. So you can go back to the settings and try to search there for this very word. And then everything is quite simple:

1. Check the box next to "Enable MultiSSID", that is, "Enable ...".
2. Next, enter the network name, specify the type of password encryption and click the "Add" button, that is, "Add".
3. Below you can see a table where all created access points are indicated.

For example D-Link router it all looks like Figure 6.

Rice. 6. MultiSSID setting in D-Link settings

As you can see, everything is quite simple. Yes, and setting the SSID parameter is also very easy. To do this, just go to the settings of the router and find the necessary line there with the word "Wireless Name", "Network Name" or even directly "SSID". Again, if you have any problems, write about them in the comments.

What is an SSID and how can I get a Wi-Fi ID on Android

Using devices with Android OS installed on them often comes down to Internet surfing. This, of course, requires a Wi-Fi internet connection. Well, this, in turn, requires knowledge of the SSID on Wi-Fi in Android. Learn more about what it is and how to find the SSID on Android phone you can find out by watching our video

Routers and access points use SSID (Service set identifier) ​​- wireless network identifiers to determine the names of networks. Although routers have default names, network administrators can and should change the default SSID to a username. Setting an SSID will enhance the security of your work and help you (and your network users) identify wireless networks in your range, including suspicious ad hoc networks that may be set up to steal your data. By finding the SSID of your wireless network, you can secure your computer.

Check your wireless connections

1. If possible, locate your PC in an area where only one wireless network is active.
2. Click right click click on the network icon, which is similar to the connection access icon on mobile phones.
3. Browse the network listed in the "Wireless Network Connection" section. Its name is your SSID.
   Accessing a router (when connected to a wireless network)
4. Click on Start. In the search bar, type "cmd" (without quotes). Press Enter.
5. AT command line window, type the combination "ipconfig" (without quotes) and press Enter.
6. Review the Windows IP configuration results that appear. Locate the "Connect by local network» -> «Default gateway». Enter the IP address of the default gateway here.
7. Open a browser.
8. Type the default gateway IP address you noted down earlier into the address bar and then press Enter.
9. Enter the password for the router. Press the Enter key. If you do not remember the password exactly, you can check it in the documents for the router. The password can also be listed on the underside of the router.
10. Check out the "Setting up a wireless network" section in the router's admin panel. Find the SSID (you can also change the SSID here).

Most of those who at least once connected to the Internet via Wi-Fi faced the need to find a specific access point. And this means that one way or another he was forced to find out what the SSID of the Wi-Fi router is called.

Identifiers

Like it or not, and each unit of almost any type of equipment, be it hardware or software emulated, has its own identifiers. Of course, for different types of equipment they have a different standard.

For hardware parts that are specifically responsible for wireless connection, there are even a few of them. Depending on the complexity of the assembly of this module and the set of its functions, one or more of these recognition codes can be used on it. If the circuit is very complex, then such an indicator is available on each of its component parts. There is also one common, called the MAC address, by which such a module can be recognized, even if the IP addresses match.

And this is in addition to the fact that the modules themselves also create at least one additional code, which is called the SSID. This acronym stands for Service Set Identifier. Literally, this translates as “service settings identifier”, but in fact in Russian it is simply referred to as “network identifier”.

In most cases, it is set by the administrator himself when setting up and debugging a wireless network. Although there are options and automatic assignment. And it is very rare, but it happens that it is not possible to change it, but this kind of equipment is not found on the civilian market, and therefore it makes no sense to discuss it. What is needed is code so that users can distinguish one access point from another and connect to the necessary one without wasting time guessing.

For serviceable, high-quality, and most importantly, workable cooperation of all network elements, this parameter must be the same on all its components. By default, the SSID is limited to a character set of 32 units. At the same time, depending on the specific equipment and firmware, it can support the content of almost any letters from existing languages, hieroglyphs or special characters.

SSID

There are several methods to determine the network name. They should be considered inextricably with situations in which such a need may arise.

Below, several examples of such situations will be described and specific advice will be given on how to get out of the situation quickly and without particularly complicated actions.

Purchasing a Wi-Fi router from a provider

In some cases, when purchasing such equipment from an Internet provider, a basic set of parameters is already entered into the firmware of the device, which is used specifically by this service provider. And sometimes it even happens that a Wi-Fi access point is already, in principle, configured for a specific customer and his personal data is entered there.

In such a situation, a sticker is glued to the internal documentation of the device, where the “SSID” and “Encryption key” are indicated. The necessary information will be contained opposite the above columns. All you need to do when you get home is install the gadget in the right place, then insert the Internet cable into the connector labeled “WAN” on the back of the router and only then connect it to the mains.

Now we launch Personal Computer and in the notification area, which is also known as the tray, we find the network connection icon.

We click on it with the left mouse button and look in the “Wireless Network Connection” tab for the name that is indicated on the sticker.

As soon as such a position is found, you need to click on it with the mouse and click the "Connect" button.

After a short period of time, the system will request a key, after correctly entering which you need to click "OK" and you can start using the provided Internet access.

Unknown SSID

If it so happened that there is a configured and working Wi-Fi router, but the name of the distributed network is unknown, and a laptop or PC finds a lot of them and the level of its signals is approximately equal, then you can determine it as follows:

1. Take any Wi-Fi enabled device and stand about 5-6 meters from the access point, whether it is visible or not.
2. Now look at the signal strength of all available networks. It should be at the level of 3-4 divisions out of 5.
3. Now get close to the Wi-Fi transmitter and look at the signal now. One signal has become the strongest - this is the desired network.

hidden network

When there is a working router, but the network is not clearly displayed, then there is still a way to find out the SSID. What you need is a laptop or some other device with an Ethernet port and a connecting cable with RJ (Registered Jack) 45 interfaces at the ends. Once everything you need is collected, you will need to do the following:

1. We connect the laptop to the router using the above-mentioned RJ45 cable.
2. After access to the network is obtained, open the browser and connect to the access point. This is done by entering the IP address of the device into the address bar. You can find it in the documentation for the device. In addition to the entry point, the username and password will also be indicated there. Often, each company tries to use its own addresses, logins and passwords, but on old devices, and on some new ones, the following data is used:
   1. The entry point is 192.168.0.1, 192.168.1.1.
   2. Login - "Admin" or missing.
   3. The password is a space, "Admin" or none at all.
   4. Enter captcha or information from the image.
3. Depending on the company of the router, its model and firmware version, the further may and will differ from that presented here. On most modern models SSID, as well as other related information, is displayed on home page. But in older models or firmware versions, you need to go to the “Status” or “Status” section, where absolutely all information on setting up and operating this device, including the SSID, will be presented. Sometimes there is no such section in the router. In this case, you need to go to the section " WiFi setup". Here you can find out the name of the network, as well as the password for it. Moreover, here you can change this data.