Probably, it is not worth saying that every modern user of computer systems, when buying a laptop, tries to use all its capabilities to the maximum. Among them, one of the most important places is occupied by the convenience of working on the Internet using the wireless module. WiFi connections. It would seem that it could be easier to turn on the wireless network access mode? For some, the question of how to enable Wi-Fi on a laptop is quite difficult. And that's why.
General principles for enabling Wi-Fi on laptops
Unfortunately, there is no single rule that provides a solution to the problem of how to enable WiFi on a laptop. The only thing that can be said for sure is the problem associated with the presence of a receiving (transmitting) device in the portable computer itself.
Not all users know how to determine it, believing that having a network card and its driver installed is already the key to successfully enabling access to a wireless connection to a virtual network. It is clear that when buying a laptop, you should immediately check the presence of such a module in the most "iron" configuration. Any specialist will tell you if there is such a module on board. In extreme cases, you can pay attention to the markings applied to the main panel to the right and left of the touchpad. As a rule, there is a special icon in the form of an antenna with a signal, as well as an indicator that signals that an available wifi network currently connected.
Old laptop models
With regard to older laptop models, we can say that if there is simply no Wi-Fi module as such, you can not even try to connect to a private virtual network with a specific access point. Such a configuration simply cannot determine it.
On the other hand, some older models have a special switch on the body, which is responsible for turning on the Wi-Fi module. However, this configuration is a thing of the past. Essentially all manufacturers modern models laptops replace such switches using keyboard shortcuts like Fn+F(…).
This is the most common combination of so-called "hot" keys. True, in different models of modern laptops, it can be different.
Modern systems and hotspot detection
Speaking of modern computer systems, the question of how to enable WiFi on a laptop comes down to only two things. The first is the automatic detection of an access point to a virtual network (VLAN). The second is to enter a password if the network is secure.
In some cases, you may need to configure access manually. This is especially true for operating systems such as Linux or Mac OS X, which, by the nature of their protection and depending on the version, may simply not enable virtual network access automatically.
In general, this is correct, however, these systems are the most secure. For them, not only are viruses not created, they simply do not work in them. With Windows operating systems, the situation is different. On the one hand, they are able to determine available networks and access points automatically. On the other hand, they are the least secure even if the antivirus, firewall or any other function of blocking the penetration of unwanted and spyware, viruses, etc. is enabled. In this sense, even the firewall itself, configured to the maximum level of security, can block connection to Wi-Fi points of wireless networks (VLANs). In this case, you will either have to disable it or reduce the security level, as well as change the security settings in any Internet browser used in the system by default.
Now you can go directly to how to enable Wi-Fi on a laptop from different manufacturers. Each of them offers its own combination or combination of "hot" keys. Describing further steps on how to enable WiFi on a laptop, we will assume that the access point to the wireless network is detected automatically, and you only need to enter the password for accessing the virtual network.
MSI Notebooks
How to enable WiFi on MSI laptop? To do this, the user, regardless of the operating system, will need to use the Fn + F10 key combination.
DELL laptop. How to enable WiFi?
DELL laptops also have their own configuration system, which allows you to automatically search for an access point and connect to it. In this case, you must use the Fn + F2 keys, although in some models this combination may not be active. More on this later.
ASUS laptops
Now consider the question of how to enable WiFi on an ASUS laptop. As a rule, for this, in almost all models, you can use the Fn + F2 key combination. Among other things, you may need to enable the adapter itself in the "Control Panel" or in the BIOS.
Notebooks ACER
Problem with turning on Wi-Fi on ACER laptop, is also quite easy to solve. To do this, use the Fn + F3 keys. However, in some models, say the A-Series, this configuration can be changed.
Notebooks HP (Hewlett Packard)
Enabling WiFi on an HP laptop is as easy as on any other computer system of this type. The hot key combination Fn + F12 is used here. As they say, it's easy.
Notebooks SAMSUNG
Finally, consider the problem of how to enable WIFi on a SAMSUNG laptop of any modification. In this case, there are two solutions that directly depend on the model. The fact is that there are two options for enabling a connection to a wireless network: sharing the Fn + F12 or Fn + F10 keys. It all depends on the laptop model.
If nothing helps. Standard Windows Tools
Unfortunately, not always keyboard shortcuts or buttons to enable access to Wi-Fi networks work. There can be quite a few reasons for this. Without going into technical details, let's focus on the most well-known ones.
First of all, you need to check if the device is present in the BIOS. It is enabled by default. If not, you need to enable it manually. Now the important point is to check in the "Device Manager". It probably doesn't need to be explained how it is accessed.
Here you need to find the adapter itself. In most cases, it is labeled as Atheros ... Wireless, where "..." means the model number. With the right mouse button, you need to select the adapter itself and by pressing you need to activate the "Enable" line (if the adapter is turned off). Otherwise, if there is no such line, we can assume that the adapter itself is turned off.
In some cases, you may need to access the "View" menu, where you must specify the "Show hidden devices" command. It is quite possible that in some cases you will even need to update the device driver.
True, you should not deceive yourself. The Windows operating system itself in most cases simply “swears”, saying that the most suitable diver in the system is already installed. Here it is better to use the driver disk that comes with the laptop upon purchase.
Even if this does not help, you should pay attention to some tests of the hardware itself. To do this, you can find a lot of tools, both programmatically and in disassembling the laptop manually. You never know, maybe a train has gone somewhere.
It is worth noting another option. Sometimes you may even need to restart the Wi-Fi router itself. To do this, you just need to disable it from electrical network for about 10 seconds. After that, access to wireless VLANs will be performed automatically.
Many users who have recently purchased a laptop or netbook have problems turning on Wi-Fi and connecting to a hotspot. It's actually very easy to do this. In order to do this, a few mouse clicks are enough. In this article, we will talk in detail about how to enable Wi-Fi on a laptop, as well as how to connect to an access point.
The first step is to make sure your laptop is Wi-Fi enabled. To do this, open the Device Manager and in the list of devices find "Network Adapters". There should be two items here: Ethernet and Wi-Fi. If there is no entry about the Wi-Fi adapter or there is an icon with a yellow exclamation mark next to it, this means that you have problems with the drivers.
Turn on the Wi-Fi adapter on the laptop
If everything is in order with the driver, you need to check if the Wi-Fi adapter is enabled. To do this, go to Network Connections. The Wi-Fi adapter is usually called "Wireless network connection". If it's disabled, click on it. right click mouse and select Enable.
Checking the connection to the access point
That's it, after that your Wi-Fi adapter is turned on and ready to go. In order to organize a network and access the Internet, you need a Wi-Fi access point.
To do this, click on the Wi-Fi icon. In the window that opens, select the desired access point and click on the "Connection" button. After that, if the access point is protected by a password, the system will require you to enter it.
Often, users who have purchased a laptop or netbook encounter difficulties when turning on and configuring wifi. The procedure itself is quite simple, but in some cases there are various snags and unforeseen difficulties, and sometimes you need to configure the router before you start connecting Wi-Fi to your laptop. In this article, we will consider both a standard connection and options for solving such problems.
How to turn on WiFi on a laptop
Usually, to turn on wifi, it is enough to perform 2-3 simple operations. Which one depends on the model and manufacturer of the laptop. Here are the options for enabling a wifi network on the beeches of the most popular manufacturers:
- On ASUS laptop you need to press a combination of buttons FN and F2.
- On Acer and Packard bell, hold the FN button and press F3 in parallel.
- On HP laptops, wi-fi is turned on with a touch button with a symbolic image of the antenna, and on some models, with the FN and F12 key combination. There are also models on which a regular button with an antenna pattern is provided for this purpose.
- For turning on wi-fi On Lenovo, hold FN and press F5. There are models where there is a special connection switch for wireless networks.
- On laptops from Samsung to turn on wi-fi, you need to hold down the FN button, press either F9 or F12, depending on the model.
To connect wi-fi on laptops of various models and different manufacturers, their own original key combination can be used. Detailed description for specific model can be found in the user manual that came with the laptop. The FN button is available on almost all models of modern laptops. With its help connection of various functions and connection of a beech with other devices is carried out. If the laptop does not have an FN button, then a special button or switch is used to turn on the wireless network. As a rule, it is indicated by one of these drawings.
If not found on the keyboard, examine the ends of the laptop, perhaps the switch is on the side. Also take a close look at the bottom of your laptop. There are models in which the switch is located on the bottom cover. Moreover, manufacturers make this button barely noticeable. It almost merges with the body, and you can not see it at first glance. It may be signed by Wireles or Wlan. Turned on wifi with the right button or combination, but it doesn’t work? Wi-Fi needs to be set up on the laptop.
Hidden WiFi switch example
.
Attention: It is worth saying that such switches can be located in the most unexpected places, even on the back cover of a laptop. So if your WiFi does not work, carefully inspect the laptop for which switch.
How to set up WiFi on Windows 10
And so let's figure out how to set up WiFi in operating system Windows 10. By following simple steps, you can easily do this, you just need to repeat the instructions below exactly. If they don't help you can always ask for advice in the comments.
Connecting to WiFi on a laptop
Let's immediately consider how we can connect to wifi networks if everything is in order with the laptop settings. We do simple actions, the first thing we will need to do is in the lower right corner of the screen on taskbar find the icon in the form of network divisions (Wi-Fi antennas). Do not forget that this icon can be hidden behind the up arrow. Click on it and fields with WiFi networks available for connection will pop up. And click on the connect button.
After that, if the network has protection, you will need to enter a password.
If the password is entered correctly, then you will see a window asking you if you want your computer to be displayed on the network. I won't go into details, but if you are connecting on your home wifi network, then click on the button YES.
After these simple steps, you will successfully connect to the WiFi network.
Check if your WiFi adapter is enabled on the laptop
Now let's look at one of the most common connection problems. So you moved your gaze to the lower right corner to find an icon in the form of network divisions (Wi-Fi antennas). But it was not there; instead, there is an icon in the form of a monitor, on which there is a red cross. This means that your WiFi adapter is disabled and you need to reconnect it. To do this, click on the icon in the form of a monitor with the right mouse button, and in the pop-up menu, select the item Network and Sharing Center. In the window that opens, click on the item in the left menu Change adapter settings.
Then a window will open Network connections. In it, if you enter the icon Wireless network, and under this inscription is written Disabled. Then you just need to enable it, for this we right-click on it and select the item Turn on. And make a connection.
If, when opening the window Network connections, nothing type icons Wireless network not found, this may mean that your Wi-Fi adapter is disabled by hardware. You need to look for the WiFi power button on the laptop case, as I described above.
Check if the WiFi driver is enabled and if it works properly
Now let's consider the option that we checked our laptop and are 100% sure that the laptop's hardware WiFi adapter is connected. And the icons Wireless network no, or everything is there, but where available wifi networks should appear, there is nothing or you see that something strange is happening with the wifi adapter. Most likely there was a problem with the laptop's wifi adapter drivers. You will need to go to Device Manager and check what is happening with your wifi drivers.
Click anywhere (empty) on the lower taskbar with the right mouse button, and select Options from the drop-down menu.
On the page that opens, at the very bottom, select Device Manager.
Now expand the tab in the window that opens Network adapters, the driver for the WiFi adapter should be displayed there, usually there is an inscription “Wireless” in its name.
And so what could be wrong with your wifi adapter drivers? First of all, pay attention to the icon next to the name of your adapter, if it has any extraneous icons like "Exclamation mark" or "Circle with a dot". This means that the driver is installed but does not work correctly, to fix the problem, you need to update or reinstall the driver. Also if in the tabs Network adapters, there is no driver in which the word "Wireless" is present, which means that the driver for your adapter is not installed. If so, then in the general list Device Manager there will be an inscription " unknown device ". It will look something like this:
The solution to this problem will also be installing new drivers. If not, the inscription " unknown device" and there is no driver in which the words " Wireless". This may mean that your wifi adapter is disabled, out of order, or simply missing.
How to set up WiFi on a Windows 7 laptop
Before setting up, you need to check the availability and connection of drivers. Checking Drivers Checking the driver is to find out if they are on your device at all and whether it is currently in use. So in Control panels select item Device Manager, which can be hidden inside the item Equipment and sound.
A window opens in which we find Network adapters. Two items must be present: Ethernet and Wi-Fi. One of them should have the word "Wireless" in its name. This is your adapter.
If there is no entry about the wi-fi adapter, or there is an icon with exclamation point on a yellow background, it means you have a driver problem. If there is no entry, then the drivers are not installed and you have to install them from the disk that came with the laptop. Or find it on the manufacturer's website. Without them, wi-fi will not work. If there is an entry, but there is a yellow exclamation mark opposite it, right-click on this item. In the window that appears, select "Enable". The reason for the connection difficulties may lie in the fact that the adapter is set to save power. To disable it, right-click on it, then Properties - Power Management, now you need to uncheck the box "Allow the computer to turn off this device to save power."
Now everything is fine with the driver. Turning on the adapterwi— fi . For this, through Control Panel→ Network and Internet go to Network connections. Here we find Wireless network connection. This is the wifi adapter. Right-click to open the dialog box and select Enable. Connecting to an access point. It remains to connect the laptop to the access point. Make sure the access point is active. Find the wi-fi icon in the lower right corner of the screen on the taskbar. When clicked, the network management window will open, select the desired network, click "Connection".
If the network is protected by a password, the system will ask you to enter it (if you forgot the password from your network, you can find it out). Only after entering the required password you will be able to use the Internet. If the network is open, the connection will happen automatically. That's all. Turning on and configuring Wifi on a laptop completed. If you once set up wi-fi, then you don’t need to do this anymore, as they will automatically be saved in the laptop’s memory. You will only need to turn it on with the appropriate button or keyboard shortcut. Keep in mind that a wireless connection consumes a lot of power from your device, so the battery will be used quite intensively. Pleasant and simple connections without adventure!
.
Many people are already using the wireless network, because it is convenient, especially if you have such autonomous devices at home as, and a smartphone. And if you are already among those who have purchased and connected a router, you just have to find out how to turn on Wi-Fi on a laptop and start using wireless Internet.
Wi-Fi connection by hardware method
Almost all laptops have a button or switch for Wi-Fi. They can be located either on the top of the case near the keyboard keys, or on the side of the laptop.
If you did not find a button or a switch on your device, you can connect Wi-Fi using the keyboard. On one of the keys from F1 to F12 there is a pattern in the form of an antenna or a laptop with “waves” diverging from it. You need to press desired button in combination with the Fn key.
Where to turn on wifi on an HP laptop: turn on the network using the touch button with the image of the antenna, and on some models - by pressing the Fn and F12 key combination. But there are also HP models that have a regular button with an antenna pattern.
How to turn on wifi on Asus laptop: on computers from this manufacturer, you need to press a combination of the Fn and F2 buttons. On Acer and Packard bell, you must hold the Fn key and simultaneously press F3. To turn on Wi-Fi on Lenovo, press F5 together with Fn. There are also models that have a special switch for connecting to wireless networks.
On Samsung laptops to activate Wi-Fi, you need to hold the Fn button and simultaneously press either F9 or F12 (depending on the specific model).
If you use an adapter, then you don’t need to know how to turn on Wi-Fi on a laptop, since it is always enabled in hardware. But for complete certainty, you can check the operation of the adapter using the Fn key combination with the one that shows the wireless network, as we described above.
Wi-Fi connection through programs
If, after turning on the button, switch, or keyboard shortcut for Wi-Fi on your laptop, the network still does not appear, it is likely wireless adapter turned off programmatically, that is, turned off in the OS settings. You can connect it in two ways:
If the device still does not start or an error occurs, download the drivers for the adapter from the official website and install them, then try again according to step 1 or step 2.
If your laptop is factory-installed with Windows, you will need to run a program to manage wireless networks from the laptop manufacturer. They come with almost every computer, and they are called "wireless assistant" or "Wi-Fi manager", and are located in the Start Menu - Programs. Sometimes, without running this utility, no efforts to connect to the network work.
Thanks to mobility and stylish design, as well as good functionality, laptops and netbooks have become very popular. Nowadays, every modern person uses the Internet. Thanks to Wi-Fi technology, taking a book with you to a bar or cafe, you can communicate with friends and work colleagues, check mail, read news on the Internet and much more.
Many laptop users are interested in the question, how to turn on wifi on laptop As a rule, in order to turn on Wi-Fi, you need to perform a couple of simple operations.
Quick turn on wifi on laptop
The combination of keys pressed depends on the model of a particular laptop. Here are a few options for starting a wifi network on popular models.
- On Samsung laptops, to turn on wifi, you need to press the Fn and F12 or F9 buttons for a couple of seconds, depending on the model.
- On Aser laptops, turn on by holding the Fn + F3 button
- To enable on Asus, you must press Fn + F2
- On Lenovo, turn on wi-fi by pressing Fn + F5. But there are also models where there is a separate switch with a wireless network pattern for this.
On different laptop models, from different manufacturers, their own keyboard shortcut is used to turn on wi-fi. For more details on the launch scheme, please refer to the user manual for the laptop. All modern laptops have an Fn key. If there is no such button, then there is a separate switch or button to start wifi. And it looks like this:
Turned on wi-fi with the desired key combination or a separate button, but it does not work? So you need to set up wifi on your laptop.
Checking Wi-Fi Drivers
Let's start with the main one, check the version and availability installed drivers. This is necessary in order to make sure that the necessary drivers are available and that they are enabled. On the desktop, select the icon<<компьютер>> and select the item<<свойства>>. Then select from the left column<<диспетчер устройств>>.
In the window that opens, find the line network adapters. This line should contain our wifi adapter and is signed as wireless network adapter.
If there is no such line or there is an icon with an exclamation mark on a yellow background, then the driver is either not installed or does not work correctly. We solve the problem by installing them from the disk that came with the laptop. If there is no such disk, then you will have to look for them on the website of the laptop manufacturer.
Turn on the Wi-Fi adapter
We figured out the drivers by installing the necessary ones for our laptop model. Now you need to start wifi. To do this, we do the following: Control Panel > Network and Internet > Network and Control Center public access > Change adapter settings. Choose Wireless network connection Right-click on it and select Enable from the menu.
If everything is done correctly and wi-fi was turned on, then you will see this icon on the desktop.
Click on the icon, a menu will appear with available wireless networks, which should include yours.
After you click on the name of your network and click Connect, this window will appear in which you need to enter the security key - the password for your network. If it is not password protected, then the connection will occur automatically.
