In operating systems of the Windows family, by default, the language bar is displayed in the lower right corner of the screen, which shows the current keyboard layout and the input language used. The language bar is also often used by novice computer users to switch the text input language from the keyboard. In some cases, the language bar may disappear from the desktop, which causes significant inconvenience to those who often use it. After that, users begin to look for an answer to the question of how to restore Windows 7 language bar.

Restoring the panel is not difficult and can be done different ways. Consider the most accessible of them.

Restoring the language bar through the Control Panel
The easiest way to restore the language bar in Windows 7 is to activate it through the Control Panel. This will require the following steps.

Restoring the language bar through the registry
In some cases, it happens that the first method does not work. Then you can try to restore the language bar through the registry by following the steps below.

Reboot the operating system and check if the language bar was restored.

For those who do not want to edit the registry manually, we suggest downloading to a computer from text file. Once downloaded, unzip the archive and run the file it contains, which will do all the work for you once it's run.

At the end of the article, I would like to note that problems with the panel usually occur after using various tweakers, cleaners and system optimizers. If you recently cleaned your computer and, in particular, the registry with their help, then start the recovery procedure from backups that they must create.

If there is no such function in the program, then try using the regular function of the operating Windows systems(restore) the system to a selected restore point prior to the date that the problems with the language bar occurred.

This element allows you to quickly switch between keyboard layouts. Even those users who are used to switching using the keys, all the same looking at the monitor, are looking for it visually.

If the Windows 7 language bar is missing, this brief instruction will help. Let's start with its definition. The language bar automatically appears on the taskbar near the system tray when typing services are started, for example, manual input recognition, layout, etc. This panel is needed to quickly change the typing language or keyboard layout. It is possible to place it on the desktop in any place convenient for the user. Usually located according to the settings on the Windows default 7 bottom-right, near the tray.

But sometimes she disappears. Possible cause not displaying may be a virus program that infected the computer, or it disappears as a result of the work of the System Cleanup Wizard (therefore, you should work with optimizers carefully, with knowledge of the processes it performs). Of course, switching between languages ​​can be done by simultaneously pressing Alt / Ctrl + Shift on the keyboard. But, not seeing the currently used language settings on the screen, this is not convenient.

Restoring the language bar

Recovery in Windows 7 is performed by a variety of methods. All of them will restore the display of the disappeared icon, depending on the reason that caused it to disappear. There are the following methods to enable its display, we will give, starting with the simplest:

Using normal Windows 7 features

After completing the above steps, the icon that has disappeared will be displayed.

In the absence of a positive result, it is recommended to activate the language bar by an alternative method.

Using the Windows 7 Scheduler

The main functional difference between the language bar in win 7 and previous versions of Windows is that it includes the Windows system scheduler.

This scheduler is responsible for starting the ctfmon.exe process that manages it. The missing icon is possible due to problems starting this service.

To determine if the scheduler service is running correctly, do the following:

Using the Windows 7 Registry

This method is already more complex. This method also requires that the ctfmon.exe utility be included in the autorun system. Before starting work, determine the presence of this file. Location in Windows 7 in the C:\Windows\System32 directory. If not, you should copy from any other computer that has a working Windows 7.

The culprit for the disappearance of the icon are viruses, and also various failures in the system, but sometimes the owner himself personal computer inadvertently removes the language indication by transferring it to the desktop. In this case, you just need to use the drag-drop method to install it in its original place.

These techniques will help if the language icon from the monitor screen disappeared in Windows 7.

What to do when the language Windows panel 7 disappeared, how to restore it and prevent it from disappearing again? Let's deal with this, and also consider what it is.

Not all users switch the language on the computer using the hot keys Ctrl or Alt + Shift. Many people need a language bar for this. And to see what language is now selected for entering text is essential for working with text documents and in correspondence. This element is displayed, as a rule, on the taskbar, although it can be floating (placed on the desktop). If it is on the desktop, then the language bar must be collapsed by clicking on the button of the same name at the bottom right. After that, she will take her place.

You can return the language bar to "Windows 7", which is not on the desktop, in the following ways ":

• through the corresponding element of the "Control Panel";
• using the registry editor;
• adding a link to the file responsible for the function in autorun;
• through command line.

How to restore the language panel in the "Seven" without resorting to tricks, like launching a command line? We execute the algorithm below.

1. First of all, open the "Control Panel" through the "Start", "Explorer" or in another way.

1. In the panel, click on the Regional and Language Options icon if the elements are displayed as icons.

Another option to get to the desired window is to execute the “intl.cpl” command in the Win + R command interpreter or the Start search box.

1. Switch to the "Languages ​​and Keyboards" tab.

Also, this window is opened by the “control intl.cpl,2” command.

1. Click on the "Change Keyboard..." button.

1. In the lower part of the window called "Installed services", we look to ensure that the system has at least two languages ​​(Russian and English, for example).

1. We find the desired section, expand it and then click on the "Keyboard" element.

1. We mark the flag of the added language and close the window with changes to the system.

1. Click on the name of the second tab.

1. Here you need to put a switch next to the satisfying option:

• "Places in an arbitrary place on the desktop" - allows you to display a floating window on the desktop or pin it;
• "Pinned in the taskbar" - the corresponding icon will return to the taskbar near the watch;
• Hidden - most likely this option is activated, so the element is not displayed.

1. Click "OK" to save the new settings.

In the "General" tab (section "Default input language") you can set the language that will be used to enter text in the system as standard.

The "Keyboard Switching" tab allows you to configure button combinations that change the keyboard layout, as well as set their combination to select a specific language.

1. Expand the branch with global configuration settings and go to the "Software" section.

1. We go to the address: "Microsoft\Windows\CurrentVersion". Here you need to find the key "CTFMon" or make sure it is missing.

Most likely it is not there - we are correcting the situation.

1. Through the context menu, call the "Create" command and select the parameter type as "String".

1. We replace its name with "CTFMon", although it does not matter what it will be, the main thing is the value.

1. Through context menu element or double-clicking on it to open the edit dialog.

1. Enter the value as "%windir%\system32\ctfmon.exe" and click "OK".

After the reboot, we check the effectiveness of the work done.

As a result, we will have a shortcut to launch after the start operating system program responsible for alternative ways input and language bar, in particular.

Command line or interpreter

The easiest way to perform the procedure is through the command or search line "Start" or the command interpreter (let's look at its example, because it's the fastest).

1. Press Win + R and enter the following line REG ADD HKLM\Software\Microsoft\Windows\CurrentVersion\Run /v CTFMon /t REG_SZ /d %windir%\system32\ctfmon.exe /f then press Enter or click OK

This will create a string parameter "CTFMon" with the value of the path to the ctfmon.exe file in the registry key specified after the "ADD" command. If this entry exists, it will be overwritten without prompting. In general, everything is the same as what was done through the registry editor, only much faster.

Video how to restore the language bar

The video shows how to quickly return the language bar in Windows 7 using the first method.

Sometimes accompanied by unexpected troubles. It takes a lot of time and effort to set up the OS for comfortable operation. Users experience difficulties caused by inept actions with settings, bugs, viruses, disappearance of ctfmon.exe from startup. What to do when the Windows language bar disappeared - how to restore this tool on the desktop, which allows you to instantly determine the language mode, go to its customizable characteristics? How to turn it on, forcing it to act in working mode?

Sometimes the language bar can disappear from the desktop

The language icon becomes visible when the OS is used multilingually, otherwise the need to use it completely disappears. Setup schemes may differ from each other.

The rules by which the language layout of the keyboard is switched are set by many users or configuration services professionals during the installation of the operating system. But also changes are made using special system functions to reconfigure the corresponding characteristics.

When using the XP version, check if the software is debugged to work with several languages. If software rebuilt properly, and the notification icon for the language used is gone, check its presence by right-clicking on the tray. If necessary, check the "Language bar" checkbox to enable the display of the icon.

Try clicking on the location of the language bar

There are frequent cases when the icon disappeared due to more serious reasons, but it still needs to be returned. Then the problem is solved by other means.

Depending on the cause of the error, use one of the solutions to restore system functionality:

• The "Control Panel" has extensive functionality for solving tasks of a certain level, in particular for similar ones.
• Check if startup programs are used, if they are present.
• Try using third party software.

How to turn on the Windows language bar in the PU

Typically, the Windows language bar is located in the area of ​​the tray that is visible on the right, at the bottom of the monitor. If the icon is gone, and you are in, the following recommendations will do:

1. By pressing W+R open the window, write intl.cpl. Alternative option: go to PU - "Regional and Language Options" - "Languages ​​and Keyboards" - "Change Keyboard".
2. "Languages ​​and text input services" - "Language bar".
3. Check the box next to "Pinned to the taskbar".

This is what panel recovery looks like on Windows 7

The previous scheme works for the seventh version; on Windows XP, you can restore it like this:

1. Open the "Control Panel", the "Regional and Language Options" section.
2. Find "Languages", "More".
3. Open "Settings", "Language bar".
4. Place an icon next to "Display language bar on desktop".

Restoring the Language Bar on Windows XP

How to return the language bar in Windows to the bottom bar by autoload

To restore the loading of the icon when you turn on Windows, you will need to use a specialized automatic startup service. Sometimes you may find that the real service is gone. To correct the situation based on Windows 7, 8, XP, the following scheme is suitable:

1. Pressing Windows + R will open the Run window.
2. Write the command regedit and Enter.
3. An interface should open allowing you to edit the registry.
4. Find the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run branch.
5. Click on the free part on the right side with the mouse and create a "String parameter" (specify any name).
6. Using right button, select a new parameter, change its data.
7. Fill in the column "Value" with the command ctfmon = ctfmon.exe, agree with the changes.
8. Now the editor needs to be closed, and the computer turned off and on again. And you can also log out / log in to permanently restore startup.

This will allow you to return the tool, place it conveniently for use on your desktop. After you have tried several methods, but the Windows language bar is still not displayed as a result of your actions, use the most adapted layout switcher - Punto Switcher, to enable this much-requested tray symbol.

The language bar is an icon in the taskbar that allows you to quickly change the keyboard layout or input language. When you switch the language using the keyboard keys, the language bar also reflects the changes that have occurred. Sometimes, as a result of careless actions or due to the malicious influence of installed programs, this panel disappears from the desktop and it becomes unclear which layout is currently being used. The simple instructions below will tell you how to return the disappeared language bar to its place. There are two ways, consider both in more detail.

To return through the Control Panel, do the following:

Registry

The second way to return the missing socket is to edit the registry of the operating system. It happens like this:

Task Scheduler

In addition to the actions of programs and the user, the disappearance of the language bar may be due to the fact that the Task Scheduler service has stopped working. Therefore, sometimes to restore the language bar, it is enough for this system service to work correctly. To run it, do this: