Articles and Lifehacks
Many must have wondered, how to flash a samsung phone without contacting a service center (or a question how?). It is quite possible to do this at home - for example, using a special program. It is highly recommended that you back up all your files, or better yet, move them from your mobile device to your computer. It can be contacts, messages, topics, photos, videos or music. After clearing the phone of these files, you should reset all settings and reboot it. After making sure that everything is done correctly, you can begin preparing for the flashing.
Preparing to flash your Samsung phone
To begin with, the user will need USB drivers and high-quality firmware for his Samsung phone model. You can find the required firmware on special sites or forums. After downloading it, you can proceed to download special software. Pretty good program is MultiLoader. Before downloading this software, you need to make sure that its version is the latest.
Another helpful advice- this is to remove all programs from the PC that are somehow related to Samsung, and even better - install a new operating system.
So, how to flash a samsung phone using the MultiLoader program?
Samsung phone flashing
After installing the MultiLoader program, run it and select the "BRCM2133" item. Next, check the boxes in the following items: "Boot"
→ directory "bootfiles", "Factory FS", "Rsrc1", "Full Download", "Amss" → file "apps_compresset.bin".
After that, the user enters the "Download" mode by holding down the lock, volume keys and the phone's on/off button for 3-5 seconds. The message “Download” that appears indicates that the operation was successful. Then the owner mobile phone connects it to the computer with a USB cable. After the PC detects the device, the inscription “com15 ready” appears at the bottom of the program, indicating the model. The user presses the "Download" button and waits 2-3 minutes. After the operation is complete, it unplugs the USB cable and reboots the phone - preferably several times.
If the mobile device starts on English language, it is necessary to perform "Pre-configuration" by typing the combination "*#6984125*#" → "Pre-configuration" and entering the password "*#73561*#". After that, you need to select the country of residence and wait for the reboot. As soon as the device is ready again, they drive in the configuration “*2767*3855#”, which will help to completely reset the settings. Flashing completed. Everything is very simple, and you do not need to call
Most owners of trendy smartphones phone or smartphone samsung model j5 j5 on operating system with a screen - dpi believe that it is impossible to change the firmware in these gadgets on their own, but they are deeply mistaken.
The reasons why you need to flash a phone, a Samsung smartphone model j5 j 5 on an operating system with a screen - dpi, are very diverse: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore the software after an unsuccessful installation, or you just want to install the most new version firmware.
Firmware Flashing of smartphones Samsung ml, s7 edge, led pro ssd evo and other models.
- Flashing on your own can be done on all phones of a phone, a Samsung smartphone model j5 j 5 on an operating system with a screen - dpi.In addition to the topic of firmware on smartphones for android, there is a review article:. It tells in detail, there is a video instruction on how to reflash a mobile device on Android kit kat.
In what cases it is necessary to update the firmware of smartphones of a phone, a Samsung smartphone model j5 j 5 on an operating system with a screen - dpi and for other models:
If the phone does not turn on, although the reason may not be in the firmware;
If the phone is constantly buggy and reboots;
If an unsuccessful firmware is made and the phone must be returned to its original state;
If you want to install the next, most up-to-date firmware version;
Download firmwares, programs, flashers and Samsung firmware.
Download free firmware for Samsung s7 edge, led pro ssd evo, s 8 s8 plus on PC.
- official website of the manufacturer cell phones Samsung s7 edge, led pro ssd evo, s 8 s8 plus and other models.The Samsung manufacturer's website contains the most up-to-date and fresh firmwares for Samsung a8 2018 phones with a dpi screen and for other different Samsung models.
Instructions for Samsung firmware.
How to flash a smartphone. Instructions for firmware using the example of a Samsung scx 4200, a8 2018 phone.
In the smartphone, go to Settings-> For Developers and turn on USB debugging.
We connect the USB cable from the phone to the computer and install the firmwares.
Disconnect the phone from the computer, turn it off and remove the battery.
We launch the SP Flash Tool program on the computer, it is needed to upload new firmware to the phone.
In the program window, press the Scatter-loading button and in the window that opens, select the MT6589_Android_scatter_emmc.txt file (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for updating.
Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).
Now click the Download button. We answer "Yes" to any pop-up messages.
We connect the smartphone (using a USB cable) to the computer, the new firmware will start uploading to our device automatically.
At the end of the process, a window with a green circle will appear. You can disconnect your phone from the PC and turn it on.
For more information on how to do this, you can watch the video instructions:
To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out the phone model and its firmware version by dialing the code in the phone *#0000# .
Instructions for flashing Samsung scx 4200, a8 2018
One more example. Instructions for firmware mobile phone Samsung scx 4200, a8 2018.
Firmware for Samsung scx 4200, a8 2018 phone: download firmware for
Firmware Samsung scx 4200, a8 2018
Today we will talk about how to flash Android Samsung different versions and what programs are required for this.
Firmware (system reinstallation) Samsung smartphones almost no different from flashing devices from other manufacturers. The only difference is that you need to use the right tools.
Firmware Samsung Galaxy S7, S6 and Samsung A
To reinstall Android on Samsung of these models, you will need:
- USB driver "Samsung USB Driver" (Download);
- firmware program - Odin (Download);
- the firmware itself (its versions under different models devices can be found on the official website of the company).
Now let's go directly to how to flash Android Samsung new models. When everything is downloaded, you will need to unpack them. First of all, you need to install the driver. It is needed so that the computer can identify the phone. When this is done, you will need to go to the folder where Odin was unpacked and run the executable file with administrator rights.
A program window will open, in which there will be four items on the right with the ability to select files. You need to click on each button and select required file. They should be placed in the following order:
- for BL – BL…..tar.md5;
- for AP - AP….tar.md5;
- for CP - CP….tar.md5;
- for CSC - CSC….tar.md5.
On the left side of the screen there are checkboxes called Auto Reboot and F.Reset Time. By default, they are set, but it's better to make sure that the corresponding options are enabled.
Everything, the program is configured. Now you need to prepare the smartphone and connect it to the computer. To do this, you first need to put the phone into firmware mode. On Samsung, this is done by simultaneously pressing and holding three keys at once: "Power", "Home" and "Volume Down". Keep the buttons pressed until a yellow triangle appears on the display. When it appears, release the three previously held keys and click on "Volume Up".
The phone is ready and it remains to connect it to the computer via a USB cable. It may take some time before the PC detects the device. When this happens, a blue “COM” will appear in the upper left corner. Everything, you can click on Start, after which the firmware process will begin. Upon completion of the system reinstallation, the phone will reboot (if the Auto Reboot option was previously selected), and Finish will be displayed in the firmware program.
How to flash Samsung Galaxy S3
Although samsung galaxy S3 is already a very old device, it still enjoys some popularity. S3 is a kind of iPhone 5 in the Samsung world. This is not surprising, because these devices came out at almost the same time. Since this smartphone is quite old, the firmware order for this android will be slightly different.
For firmware, you need a program called MultiLoader (Download), firmware and USB driver. Before reinstalling the system using the specified software, you need to make sure that there are no other applications from Samsung on the computer. If they are present, then they must be uninstalled.
When the MultiLoader is unpacked and the USB driver is installed, you will need to run the specified program. In it, you need to select the BRCM2133 item, and then check the following checkboxes: Rsrc1, Factory FS and Full Download, and then specify the paths to the firmware files: for Boot, specify the Bootfiles directory, which is located in the folder where the firmware was unpacked, and for Amss, a file called apps_compresset.bin.
Photo: Flashing Android Samsung Now that the program is configured, you need to prepare the phone itself. To do this, you need to simultaneously hold down the keys on it: "Power", "Home" and "Volume Down". After about 3 seconds, Download will appear on the screen, which means that the phone is ready to receive files, and, therefore, it can be connected to a PC via USB.
Photo: Flashing Samsung Galaxy S3 If everything was done correctly before, then a few seconds after connecting the phone, the MultiLoader will display the inscription com15 ready Samsung Galaxy S3. Now you just need to click on Download and wait for the process to finish, which takes about 2-3 minutes. When it completes, you will need to disconnect the USB and turn on the phone.
As you can see, the answers to how to flash Android Samsung are pretty simple. But despite this, in the absence of experience, it is still easy to make a mistake. In order not to turn the phone into a "brick", it is better to do backup smartphone from which it will be possible to recover if troubles arise during the reinstallation of the system.
Dear readers! If you have any questions or comments on the topic of the article, please leave them below.
Need to upgrade your hardware platform? Mobile device is buggy and does not function properly? You can fix the situation by learning how to flash a phone at home. The procedure is available for gadgets of almost all manufacturers. The firmware can be implemented in different modes - traditional and "dead". All you need is a desktop PC or laptop, a cord, a special program and instructions.
Programs for flashing mobile phones
The modern market offers a huge range. The most popular are devices of such brands as Nokia, Lenovo, LG, Sony Ericsson, Apple and others. Each brand offers a wide range the lineup phones. To flash the latter, you need to find an individual program for the device of a certain brand and model. There is universal software designed for smartphones of a certain manufacturer. You can find them on the Internet. Software can be both paid and free. You can choose any, trusting only reliable sites.
The subtleties of the procedure for flashing a mobile phone
When installing a new firmware on any phone, you need to follow a few recommendations:
- Device charge. Before flashing, you need to make sure that the battery life is at least 50%.
- Saving data. Photos, music, documents and other information should be backed up.
- Installing software on a computer. The software intended for firmware must be run directly on the PC by selecting the drivers suitable for the device of a certain brand and model. After complete installation The computer software needs to be restarted.
- Connecting phone to PC. First, it is advisable to connect the cord, and then start the computer and connect the mobile device.
- Firmware update. After choosing the mode of operation, you need to follow the instructions. Successful completion of the firmware is only guaranteed if the requirements are fully met.
Important advice! During the firmware, it becomes necessary to select the software version. Experts do not recommend lowering the latter. This can lead to the death of the device. The numbers in the file names should be an order of magnitude higher than the values on the current hardware firmware. Do not update or reinstall software on phones that are under warranty. The latter will be cancelled.
This work can only be entrusted to employees of the relevant service centers. It is undesirable to carry out firmware in the absence of good skills in working with a PC. Good luck!
Upgrading or installing the firmware can fix many performance issues. Android devices a. Long-term operation system memory mobile gadgets are littered with residual files () (“casts” of previously downloaded programs), malicious code () and other unnecessary data. All this leads to a decrease in the performance and speed of the processor and RAM. As a result, the smartphone (tablet) often freezes and reboots on its own. And if the factory reset () did not lead to a positive result, the user can only update the software himself. Consider how to reflash a phone running on the Android OS.
Types of firmware and how to install them
Android firmware at home is in many ways different from installing the rest of the software. This process is more labor intensive and is associated with many risks. If you choose the wrong version of the software or violate the update process, there is a chance that your phone or tablet will turn into a useless "". However, having learned how much a flashing from professionals costs, many still decide to change the version software on one's own.
There is no single instruction for flashing Android that would fit all models. mobile devices. It all depends on the manufacturer of the device and what software is planned to be installed.
All Android firmware are divided into two types:
- Official. They are supplied directly by smartphone manufacturers and are usually only suitable for a certain brand. Such programs are considered the most reliable, so they should be used whenever possible.
- Unofficial (custom). Developed by users of Android devices and small firms. They are applied when Android is reinstalled on Chinese devices (for example, Lenovo, Meizu, Xiaomi, etc.).
When using custom software, there is a possibility of installing a low-quality update, as a result of which the gadget will start to slow down even more. Therefore, you need to download the executable file only after reading its description in detail and reading user reviews.
There are several ways to change the firmware on Android:
Preparing for self-flashing
Before reinstalling the software on an Android device, a number of preparatory measures must be taken:
- download a software update program on a PC (Odin, Kies or SP Flash Tool and find a high-quality usb cable (if the reinstallation is done using a computer);
- (if you plan to reinstall Android to an unofficial version);
- charge the battery of the gadget by 100%;
The functionality of the installed software largely depends on its version and assembly. So that the new firmware does not start to conflict with the hardware after some time, you need to find out serial number mobile device:
We will consider a more detailed procedure for updating Android on a phone using the example of Samsung and Lenovo, although this instruction is also suitable for many other brands.
Smartphone firmware from Samsung
Software updates on Samsung devices are performed using the Kies program. This utility allows you not only to reflash a tablet or phone, but also to backup the old system, synchronize personal data with a PC, and much more.
Before upgrading the firmware to the latest software, you need to properly configure Kies. This is done as follows:
After setting up Kies, create a backup of the software available on your smartphone. This will restore the system to working capacity in case of unsuccessful firmware. To backup Android via PC, in the initial window of the application, select " Backup”, mark the items you want to save and start the procedure by pressing the corresponding button. 
After creating a backup, feel free to reflash your phone or tablet through a computer. To do this, open the "Tools" section in Kies and activate the item marked in the figure, thereby starting the update process. 
While the device is being flashed, in no case disconnect it from the PC and do not perform other actions that may lead to a disconnection.
After flashing the Android phone through a computer, check the performance of all its functions. If nothing fails, then the software update was successful.
Replacing the firmware on a Lenovo tablet via a PC
Before flashing a Lenovo tablet, you need to understand that there is no software developed specifically for this brand. Therefore, one has to be content with universal developments. One such application is the SP Flash Tool. Consider how to update the software on Lenovo using this utility:
After you managed to update the firmware, check the performance of all tablet functions.