- (not official!) - This software is developed on the basis of the official 3.4.369 (the one that will pour from the satellite 07.10.13.) The main difference of this firmware is that advertising banners are not shown when switching channels. Works stably.

Features of this firmware:

2 - the submenu search for tricolor TV channels has been removed from the main menu (but it is still available in the menu >> settings >> automatic search >> search type >> tricolor TV) or during initial installation (reset to factory settings)

3 - when you enter the main menu or the game menu, the picture does not disappear!

4 - the ruffles on the side were removed in the main thing (in my opinion it was not harmonious :))

5 - exit from the channel list is organized by double pressing the ok button (exactly the same as it is organized in 99% of all tuners)

6 - when you press the game button, the swastika flaunted the search for tricolor channels now, as it should be, the swastika of the game :)

7 - the algorithm of the EPG menu has been changed - now it is much more convenient (everything can be done with just one button ok)

8 - in the Tetris menu, the ok and up buttons were swapped

9 - possible, but not guaranteed! the cause of hangups of receivers with modules of the 11th series has been eliminated.

10 - the actual channels on 10/05/2013 have already been collected in the firmware, all garbage has been removed !!!

Past releases

The procedure is quite simple and does not require special skills from subscribers, you just need to follow the instructions for replacing the software from the info channel. The update process takes some time and you need to be patient and wait for the end. But despite all the warnings, some users do not wait for the end of the software update process and as a result the receiver stops working.

Practice shows that in very rare cases, even after waiting for the software update to finish, the receiver may not turn on after a reboot. There is only one diagnosis - a failure to update the software.

But do not despair. This can be fixed by yourself and at home if you have a computer or another similar working receiver at hand. How to do this is described below. Helps in 99% of cases of unsuccessful software updates from the satellite.

Software update from a computer.

1. We purchase / solder ourselves null modem cable

2. Disconnect the receiver and computer from the network.

3. Connect the RS232 input of the receiver to the COM port on the computer.

4. Turn on the computer.

5., unpack and install the program

6. and unpack the required receiver firmware:

7. Run the program (the shortcut should appear on the desktop).

The following window will appear.

8. Click the Open File button and select the downloaded file with the firmware in the window that opens, after unzipping it.

9. Click on the Upload button, turn on the receiver in the network and turn on power button behind the receiver.

10. The progress bar of the File uploading process will begin to show the % and time until the end of the software upload process.

In this case, the letter L (Load - loading) and% of the process will be displayed on the digital display of the receiver.

11. After that, the progress bar of the Burning process will begin to show% and the time until the end of the burning process (firmware) of the software.

In this case, the letter b (burn - burning) and% of the process will be displayed on the digital display of the receiver.

12. The software update process is completed. Turn off the receiver and computer. Disconnect the null modem cable.

Record ID: 35 does not exist!

Software update from the receiver (for example, DRE 5000).

For DRE 4000, DRE 5001, DRE 7300 the process is similar.

1. We purchase / solder ourselvesnull modem cable.
2. Disconnect the receivers from the network.
3. A working receiver must be connected to the TV. The problem receiver is not connected to the TV.
4. We connect both receivers with a null-modem cable.

The picture above shows a working receiver. Below is the problem receiver.
4-2. Turn on the working receiver.
4-3. We enter the menu, select the item Settings.

5. Enter PIN. The default is 0000 (four zeros).

6. In the Settings menu, select Data transfer.

7. A window will appear:

Press the blue button on the remote control.
8. Two scales appear. And the Data Processing bar will start to fill up.

9. When the Data Processing jackal reaches 100%, an inscription appears:

10. Turn on the non-working receiver - turn it on and turn on the Power behind the receiver.
11. The filling of the lower scale has begun.

On the indicators of the receivers, the progress of the process of transferring / downloading data will be displayed in% (on the display, the symbol L - Load, loading, on the lower receiver, 5 - transfer, on the upper one).

12. After that, the TV will display:

Receivers do not turn off! The process of writing the firmware to the firmware (faulty) receiver begins. In this case, the process indication will NOT occur on the TV screen. The indication process is visible on the scoreboard of the receiver being flashed (on the scoreboard, the symbol b - burn, burn, on the lower receiver).

13. We are waiting for the indicator to reach 100% on the receiver being flashed. After the firmware receiver will reboot and the display will show the following:

14. The firmware process is completed. Remote control to the question “Data transfer completed. Repeat?" choose "NO". Turn off the receivers and disconnect the null modem cable.

Why?

I think that everyone is already aware that Tricolor TV is a place for freebies ... a free opportunity to watch almost all channels.

And so ... the topic is relevant and therefore I have collected all the possibilities about this topic. Let's start with a plugin that solves a lot of questions...

First option…

Actions…

WE INSTALL AS A USUAL PLUG THROUGH A FLASH DRIVE. Before installation, you need to stop all plugins.
Uploading the attached file keydata to the keys folder and run the plugin.
AND ENJOY VIEWING THE TRICOLOR PACKAGE (HD CHANNELS DO NOT WORK)

plugin.rar .... pick up:

keydata.rar .... pick up:

Path for keys \plugin\var\tuxbox\config
e36.bin or e56.bin

However… Tricolor TV now works on oscam and vicard, but every day you need to change the keys for them….

The second option...

Tricolor without an access card? Does it happen?

Yes, sometimes …
First you need to install the emulator oscam(if it has not been installed before). To emulate DRE (Tricolor) encoding, a special version of the oscam emulator has been developed.

Here is the assembly of the oscam, It updates the keys itself.
plugin.zip…. pick up:
Install from flash drive. After reboot, install DRE, then run au off au again au, and only then oscamdre on .... fresh keys.

Specifically on this topic...

Third option

Gold Wafer Cards…(Very good for Dreambox)

The card contains a peak controller chip such as PIC16F84 and an EEPROM memory chip such as 24C16.
In fact, they are exactly the same cards.

A firmware for this card appeared in the public, which emulates the official tricolor card of the 13th series.

It opens the same as the oscam_dre emulator, but the card has AU (auto-update), i.e. no need to update the ee.bin key file every week.

In addition, the card can be used in those tuners that do not have an emulator.

Software for receivers DRE5000, DRE7300, GS7300, DRS5001 and DRS5003 receiver 5000 firmware for free tricolor Software Update. Instructions for updating the software of DRE5000, DRE7300, GS7300, DRS5001, DRS5003 receivers. Instructions for firmware and. Firmware satellite tuner receiver DRS5001. This view does not require the presence on the receiver, anyone can flash through. For example, USBCOM adapters for cash registers are not suitable for receiver firmware. My DRE5000 receiver if connected to a computer, MPEG4 channels 24 Mar 2014. This firmware is also suitable for DRE5000, DRE7300 receivers. Firmware for receiver DRE5000, GS7300, DRS5001, DRS5003. Receiver dre 5000 key replacement and. Give someone the firmware file for the DRE 4000 and DRE 5000 receivers. The question of such a plan is for our gurus on sat receivers. Views 1689, Comments 5, Added. Program for firmware receivers Tricolor TV B. Firmware Receiver D 5000 for GO View. The point was not that the keys change, but to leave the pirated firmware on the module. To view, it is enough to pay 1200 rubles and leave the receiver. Firmware dre 5000 in hd

You need to change to a new MP4. Tricolor DRE 5000 Satellite receiver plus. TRICOLOR no longer broadcasts in this format. How to update the satellite receiver 5000 tricolor yourself. Software firmware for HD9305B receiver. D 5000 shows for free, all TV channels without payment. Firmware DRE5000 update instructions. Those who wish to help the development of the project wallet Y money How to replace the cryptomodule of the receiver DRE5000, DRS5001, DRE4000 and. Connection satellite television for free channelsFor beginners Moderator R About the DRE5000 receiver. How to flash these receivers from tricolor, Instructions for updating the software of DRE4000 receivers, phones, flasher. Buy HD receivers and tuners to watch. There was a LIT S1000 receiver, through. Firmware 5000 for go viewing. Here you can download the program for flashing receivers Tricolor TV Receiver dre 5000 key replacement and firmware for free viewing tv. Instructions for flashing and replacing the crypto module of the GS 7300 receiver! ! ! We update the list of Tricolor TV channels with reset to factory settings on DRE5000 receivers and. Help with the DRE 5000 receiver, paid for in tights. Software update for DRE4000, DRE5000 receivers Page. And if you want to watch other encrypted channels with a key, Here's what Tricolor

TELL ME HOW TO FLASH THE DRE 7300 RECEIVER AND THERE IS ONLY LEFT. Latest firmware for DRE5000, DRE7300 receivers A Instructions for updating software for DRE4000, DRE5000, DRS5001, DRS5003, DRE7300 and GS receivers. Updating the software of the DRE5000 receiver and its analogues using a computer and zero Firmware. Organic search results Top 20. Latest firmware for receivers DRE5000, DRE7300 This firmware is based on. The DRE5000 receiver is suitable for viewing not only Tricolor TV channels, but also NTV with CAM module. Learn more about Firmware for DRE 5000, 5001, 7300 receiver. Hello, tell me how to update the firmware via satellite receiver DRS 4500. Firmware 5000 tricolor for free viewing. Tricolor TV For download. Here you can download the program for firmware receivers Tricolor TV DRE5000GS.DRE5000 is an MP2 receiver. Flash 5000 for free viewing. About the DRE5000 receiver and scrambled channels. Tuner clones MASTERCODES Receivers KEYS for TRICOLOR SAT IRON