Updated - 2017-02-05
How to add RAM to a computer? A computer cannot work without memory. But even with a small memory, it will not work, but one torment. Any file will open for half an hour, and some may not open at all. And there is nothing to say about games. They just won't load. What to do? How to add RAM to a computer? Is memory alone worth buying a new computer? I can reassure you. New computer do not need to buy. Just add memory. It's easy to say, you answer. And I'll tell you - it's easy to do.
Another option is to unbox your laptop and see what information you have on the plates that came from the factory. You need a screwdriver and a lot of attention. The ideal is not static electricity in your hands or gears, so do not destroy if you are wearing rubber gloves and the screwdriver is discharging electrically.
Place the screws on your laptop to see where it came from. Two tabs are located immediately next to the battery. They have a plastic clip on each side. All you need to do is push it lightly to the right or left and you will see the plates rise at a 45 degree angle.
There is nothing easier. Try once, and for you this operation will no longer be a problem.
Most often, memory has to be added, not changed. By itself, it is reliable and rarely fails. I have computers that are already 12-13 years old, and their memory has never failed. And so, we add memory to the computer.
First we need to figure out what kind of memory we need ( DDR, DDR2 or DDR3), and which maximum volume memory is supported by your motherboard. If you have documentation for motherboard, then look at what memory slots (connectors) are on your motherboard. If you do not have documentation, you can look on the Internet. Well, if you cannot determine what motherboard you have, then the easiest way is to remove the memory from your unit and show it to the seller.
Take them out of their place and put them back in place. If something seems wrong, don't force them. You will see the plastic plugs coming back to starting position. If you still have a laptop, it won't hurt to dust clean. Finally, put in the cover and 8 screws, add the battery and cover, and boot up your laptop.
If errors occur, it means that you either did not fit into the tablets correctly, or not very well. So it's good to send them back to the seller. Another option is to take them from someone who doesn't need more fun. Did you follow the above steps or do you mind?
Before touching the memory, be sure to remove it from yourself, otherwise you risk not adding, but changing the memory completely.
And so, you found the necessary memory. Now let's see how to add memory to the computer:
- Disconnect your computer from electrical network. Completely disconnect all cables from the processor unit (keyboard, mouse, speakers, monitor, and other devices connected to it).
- Remove the left cover from the system unit.
- Locate an empty memory slot on the motherboard. They look like this (their color can be bright yellow and red and blue):
- Blow dust out of slots. Grab the memory carefully by the edges. Avoid touching chips and other parts. See where the key notch is located on the slot and rotate the memory card so that the key on it matches this jumper when you insert the card into the slot.
How to add RAM?
A few decades ago, computers ran on 1-2 MB random access memory. Today, progress has gone so far that, sometimes, 2-4 GB of RAM is not enough for normal computer operation.
If you do not want to experience inconvenience when watching a video, working with graphic editors, playing a computer game, you need to know how to add RAM.
When to add RAM
On modern computers For normal operation, it is better to use at least 4 GB of RAM. Just 2 GB of memory will significantly limit the performance of the computer. This amount of memory will not allow you to watch videos comfortably, it will be almost impossible to play, and graphic programs will slow down a lot. Also, surfing the Internet will be difficult due to the long time it takes to download sites and files to your hard drive.
The best solution would be to put 16-24 GB of RAM on the computer, which will allow you to forget about the memory upgrade for a long time.
How to add RAM to a computer
Before you buy a new stick of memory, you need to find out if you can add RAM to your computer. This can be done by opening the computer block and examining how many free slots there are.
If there is at least one slot, then you can safely buy the desired memory bar and add it. If there is no free slot, then you can change one of the bars to a new one with a larger volume.
The replacement of the strap should be done in the following sequence:
- Turn off and disconnect the computer by unplugging the power cord from the wall outlet or the unit itself.
- Pull out one of the strips, in place of which put a new one. If you want to install in a free slot, then simply insert a new memory bar into place.
- Make sure the strap fits snugly into the slot. After that collect computer block, plug in and run.
- Check that there are new GB of RAM in the properties of the computer.
It should also be remembered that on 32-bit systems it shows a maximum of 3 GB of memory. If you installed more than 3 GB, then you should reinstall Windows by installing a 64-bit OS.
How to add RAM to a laptop
In a laptop, the amount of memory can be viewed in the same way as on a computer.
To add or replace a memory bar, you must:
- Power off the laptop.
- Remove battery.
- Open the back cover or the cover where the symbol depicting RAM is drawn. To do this, unscrew the fixing screw and carefully remove the cover.
- Insert a new bar or replace the old one.
- We collect everything again the same way as it was.
- We start the laptop and check for new GB of RAM.
You can also read more about this in our article.