Advanced PC users know about Secure Boot Mode in Windows. There is an analogue of this feature in Android, in particular in Samsung devices. Due to inattention, the user can accidentally activate it, but does not know how to turn it off. Today we will help deal with this problem.
What is security mode and how to disable it on Samsung devices
The security mode exactly corresponds to its counterpart on computers: with Safe Mode activated, only system applications and components are loaded. This option is designed to remove conflicting applications that interfere with the normal operation of the system. Actually, this mode is disabled this way.
The latest devices from the Korean corporation automatically switch to normal mode after a reboot. Actually, you don’t even have to reboot the device, but simply turn it off and, after 10-15 seconds, turn it back on. If after rebooting the security mode remains, read on.
Method 2: Manually disabling Safe Mode
Some specific variants of Samsung phones and tablets require you to manually disable Safe Mode. It's done like this.
In the vast majority of cases, such manipulations are sufficient. If you still see the “Safe Mode” message, read on.
Method 3: Disconnecting the battery and SIM card
Sometimes, due to software problems, Safe Mode cannot be disabled using standard means. Experienced users have found a way to return devices to full functionality, but it will only work on devices with a removable battery.
- Turn off your smartphone (tablet).
- Remove the cover and take out the battery and SIM card. Leave the gadget alone for 2-5 minutes so that the residual charge leaves the device components.
- Insert the SIM card and battery back, then turn on your device. Safe Mode should be disabled.
If the safemod remains activated now, proceed further.
Method 4: Factory reset
In critical cases, even tricky dances with a tambourine do not help. Then the last option remains - hard reset. Restoring to factory settings (preferably by resetting through recovery) is guaranteed to disable security mode on your Samsung.
The methods described above will help you disable Safe Mode on your Samsung gadgets. If you have alternatives, share them in the comments.
Surely all experienced users working on the Windows operating system know that the OS has a safe mode for troubleshooting and solving certain problems. But not everyone is aware that mobile gadgets can also be loaded in a similar design shell.
Let's try to figure out how to turn on the phone in safe mode (Android), and what steps need to be taken to do this. We will consider ordinary devices - tablets and smartphones running on official (stock) firmware. If you upgraded your gadget with amateur (custom) firmware, then the steps described below may not respond correctly or may not work at all.
Why is this mode needed?
Before enabling safe mode on Android, let’s decide why it might be needed on this platform at all. As you know, the Android operating system is distinguished by its, so to speak, democracy, while other shells try to protect their “inner world” as much as possible from possible mistakes of a novice operator. That is, the user has access to almost all software corners of the gadget. With the help of third-party software, you can easily change not only the appearance of the operating system, but also its behavior, beyond recognition. And as often happens, you have to pay for such beauty.
If, after all your interventions, the platform began to slow down, freeze, and generally stopped functioning normally, then you begin to ask the question: “How to enable safe mode on Android to eliminate these lags?”
The fact is that this mode can be called “clean”, that is, when it starts, only the main system services are connected, where you can trace the history of installed applications and make some adjustments, and then reboot into a normal operating state.
So, how to enable safe mode on Android? In total, there are two main ways that will allow you to enter a “clean” system.
First way
You need to press and hold the gadget's power button until the reboot pop-up menu appears. Then you need to press and hold your finger on the “Disable device” option. After 5-10 seconds, a dialog box should appear that will warn you about entering the safe operating mode after clicking on the “OK” button. Some versions of Android (usually on tablets and phablets) can reboot immediately without any additional windows. Keep this in mind before you enable safe mode on your Android tablet.
After clicking on the “OK” button, your gadget should reboot and start only on basic system services. Moreover, the process may take some time, a little longer than during a normal download.
Second way
Completely turn off your mobile gadget as you usually do. Wait a few seconds and then press and hold the power button. After your phone brand or brand appears on the screen, hold the volume rocker in the “+” (increase) position.
After this, the “Safe Mode” icon will appear on the display, and the device will begin loading the platform on the main system files. In some versions of the OS, it is not necessary to hold the power button, just wait for the logo to appear on the screen and hold the volume rocker. Also keep this point in mind before turning on safe mode on Android.
How to disable Safe mode?
As a rule, this mode is disabled after the gadget is rebooted, and there is no need to perform any additional steps. If the phone continues to start in safe mode, it means the platform does not want to work correctly with installed third-party applications or the system is completely damaged.
The only way out in this case is to reset all settings to factory settings (“Settings” -> “System reset”). It is also worth noting that all information will be deleted, so take care in advance about transferring your phone book and other important data.
Many Android phone owners accidentally discover additional functionality in the system, which allows them to start the phone... in “safe mode”.
Then a natural question arises: why do you need safe mode on Android and how to actually enable it.
There are several points here. Why it is needed is clear - it does the same job on all Samsung, Lenovo, lg, fly, zte, sony phones and so on.
It’s not always possible to enter safe mode on an Android phone if you use the same technique.
Why? Because not only are there many versions of Android, such as 6.0, 5.1, 6, 4.4, 2, 4.4 2, 4, 6.0 1, 5.0, 4.1, 2.3, 4.4 4, but also the phone models themselves, such as Samsung Galaxy, Lenovo and all the others .
Although in general there are 2 options used, which I will show below, and first I’ll tell you what safe mode means (if you don’t want to read, skip the section below).
What is safe mode in android
Safe Mode in Windows and Safe Mode are equivalent. In this mode, you only have original drivers and applications enabled.
This allows you to delete a file or remove a specific application if it interferes with stable operation, for example, the phone freezes.
With its help, you can correct errors that occur in the system and solve problems that arose during its use.
Sometimes it can even serve as a lifeline - when the smartphone does not want to turn on (not always, of course)
How to start a Samsung Galaxy smartphone in safe mode
In Samsung Galaxy, as well as in others, everything depends on the version of Android. Once you determine there should be no difficulties.
This is how it is done on Androids 4.4, 5.1, 6.0, 7.0. First, turn off your Samsung Galaxy and turn it on again, but when the word “Samsung” appears, press and hold the “volume down” button until the phone boots up completely.
Other ways to enter safe mode on an Android phone
Just press the off button a little longer. Your phone or tablet will show information about the settings. Select "power off", just hold your finger on the button a little longer.
After some time, you will receive information about the possibility of restarting Android in a safe version.
In some devices, holding down the button longer is necessary to “reboot” rather than “turn off”.
How to disable Safe Mode
If you want to restart your smartphone or tablet normally, simply hold the power button and then select restart.
After restarting, the android will start in normal state. Sometimes the phone turns on in safe mode on its own - what should you do then?
There are two possible ways to solve this problem. The first is a failure in the firmware (software). Then you can try a system reset to factory settings.
The second solution is physical. The button may be faulty at the hardware level - then you cannot do without a service.
In Safe Mode, you have the ability to identify operating system problems, errors, freezes, or viruses.
This is the best way to solve problems, and you are protected from various “modifications”.
For example, it happens that you cannot delete applications, then switch and it will be much easier for you to do it. Good luck.
Not everyone knows, but on Android smartphones and tablets it is possible to run in safe mode (and those who know, as a rule, encounter this by accident and look for ways to remove safe mode). This mode, as in one popular desktop OS, is used to eliminate malfunctions and errors caused by applications.
This guide will show you step by step how to enable and disable safe mode on Android devices and how it can be used to troubleshoot problems and errors in your phone or tablet.
Booting Android into Safe Mode disables any apps you have installed (and re-enables it after you disable Safe Mode).
In many cases, only this fact is enough to clearly establish that problems with the phone are caused by third-party applications - if in safe mode you do not observe these problems (no errors, problems when, inability to launch applications, etc.), then Next, you should exit safe mode and disable or remove third-party applications one by one until you identify the one that is causing the problem.
Note: If third-party applications are not uninstalled in normal mode, then in safe mode there should be no problem with this, since they are disabled.
If the problems that caused the need to launch Safe Mode on Android remain in this mode, you can try:
How to disable Safe Mode on Android
One of the most common questions from users is how to exit safe mode on Android devices (or remove the “Safe Mode” sign). This is usually due to the fact that it is entered accidentally when the phone or tablet is turned off.
On almost all Android devices, disabling safe mode is very simple:
Of the alternative options for rebooting Android to exit safe mode, I know of only one - on some devices you need to press and hold the power button before and after the window with options to turn off appears: 10-20-30 seconds until the shutdown occurs. After this, you will need to turn on your phone or tablet again.
It seems this is all about Android Safe Mode. If you have any additions or questions, you can leave them in the comments.
Immediately after purchasing a device running on the Android platform, to the delight of the user, it brings a lot of positive emotions with its stability and performance. But suddenly, the consumption of system resources begins to increase, the system began to crash and slow down, and, in the end, notifies its owner that the device is now operating in safe mode. What does this mean? And how to disable safe mode on Android?
In order to understand everything and take control of the situation, you still need to, as they say, “dance from the stove.” So.
The Android operating system is designed in such a way that in the event of any critical error, in order to protect the device, it automatically goes into safe mode. That is, a certain part of the functions is disabled, only pre-installed applications begin to work, and programs installed by the user not only stop working, but even their icons disappear from the desktop.
What can cause failures?
Logically, this is the main question. After all, if you immediately find out how to remove safe mode on Android and perform this action, the cause of the problem will remain, which can lead to the same failures, or even more serious consequences. So what could cause the device to automatically enter safe mode?
- Incorrect user settings
- Installing third-party programs from untrustworthy sources
- A virus was downloaded under the guise of an application
- Any system error
All these problems can be solved in safe mode. And even if your device does not automatically switch to this mode, if all sorts of “braking” and “freezing” occur, the speed of the gadget slows down, applications do not work correctly, the sensor reacts unstable, etc., it makes sense to find out how to enter the safe mode. mode on Android and perform a number of specific actions.
How to enable safe mode on Android
When you enable safe mode, the Android device will boot with default settings, i.e. only those programs that were installed by the manufacturer. This does not mean that your settings will disappear completely - when you exit this mode, they will all return to their place. What should be done:
Press and hold the hardware power button located on the side panel until the shutdown menu appears. Select “Turn off power”, press and hold for a couple of seconds:
In the window that opens, you will be asked to switch to safe mode, we agree (the “OK” button):
After these steps, the device will reboot, and the following message will appear on the desktop in the lower left corner:
I must say that this is the most common method, but on some models it may look different. Therefore, if this method does not produce results on your device, you need to look at the algorithm of actions on the official website of the manufacturer of your particular Android model.
Being in safe mode (and it doesn’t matter whether you entered it yourself, or how the system worked), you can see how your device could work without being burdened with all sorts of launchers, background applications, and other “improvements” with which you personally overloaded your device. "Andryukha."
And if third-party programs do not start in safe mode, then you can easily remove them. To do this, go along the path “Settings” -> “Applications” -> “All applications”. In this section, all programs will be visible, including those that you installed yourself. Look through them, remove unnecessary or recently installed ones, because there is a high probability that they were the reason that Android automatically switched to safe mode:
How to remove safe mode on Android
First way: After you have made the necessary changes that we talked about above, you can turn off Safe Mode. Usually the simplest procedure is sufficient, i.e. Reboot your smartphone (hold the power button until the reboot menu appears):
Second way: If you are unable to exit safe mode in this way, you can remove the battery, wait about a minute, return it to its place and turn on the phone again.
Third way: It’s also worth checking the notification panel. In many versions of Android, a notification is sent, after clicking on which, the device will reboot and the system will automatically exit safe mode.
Fourth method: If this does not help, then we do this: we reboot the device, but while turning it on, press the “Home” button and hold it until the system is fully loaded.
Fifth method: Well, one more option (if all the previous ones fail): reboot the device, and when turning it on, press the volume rocker up (or down) and hold it until the gadget starts up completely.
Sixth method: Unlikely, but if all else fails, you will have to perform a factory reset. Just remember to back up your data first.
Have you ever experienced the situation described in this article? Please share with our readers how you managed to resolve it. Good luck!